Griffin GB01694 Elan Form Graphite Case for iPhone 4 he patterned composite-look synthetic material is bonded to a super-protective impact-resistant polycarbonate shell. The form-fitting case snaps around your iPhone 4 to deflect impacts and protect.
Price : £22.12
White hard back case with Silver Butterfly/flower design for Apple iPhone 4 by Stormgadgets. Designed to provide excellent protection for your mobile phone from scratches, bumps, and drops. Full external surface protection for the back of your phone without any loss of use or function.
Price : £2.69
A faceplate filter/splitter of the type installed by the BT engineer for an installed ADSL service.
IMPROVES BROADBAND SPEED AND RELIABILITY* (*although not guaranteed to be any different)
It replaces the lower half of the BT NTE5a or NTE5b master socket and provides two outlets on the faceplate, one is an RJ11 socket (wired "straight through", unfiltered) for the connection of ADSL modems, the other is a BT 431A socket which is filtered for the connection of telephony equipment.
A 3-way IDC connector on the rear also provides a filtered output to any extension sockets (new 6 way are also available).
This unit is ideal if you have one computer within reasonable distance of the master socket, if all the other sockets are for telephony use you don't need microfilters at each outlet.
DO NOT PUT ADDITIONAL FILTERS ON EXTENSIONS
* Tested by BT to SIN issue 2.2
* Compatible with caller display (doesn't strip out the caller ID information)
* CE marked - BS EN55022
* Moulded from VO rated material colour matched to BT 1P white
* Dimensions (HxWxD): 68x84x30mm (excluding protruding connector plug)
Note: The NTE5 master socket is the type that when the lower half is un-plugged, it isolates the BT network side from the subscriber.
Any ADSL modems connected to the filtered output, either via the socket on the front or connected into hardwired extension sockets wired from the rear, will not function from these filtered outputs.
Some faceplates are branded BT, some are plain - all are made in the same factory
Does not include NTE5a socket pictured
Price : £11.80
Samsung C3350 Solid XCover GTC3350AAAXEU Phones Mobile Phones
Price : £70.88
These units are fitted inside customer premises (by BT, Telephone System Installers and Builders on new build homes) and offer a demarcation point between network and customer wiring. The NTE5a can be surface mounted using the back box provided or flush mounted in any standard single gang back box. Cable entry points are provided in the top, bottom and sides. Knock-outs in the rear of the back box give additional flexibility in cable/wiring entry and exit. - made From Fire redardent ABS - 601 sockets to BS6312 and BT's D2902 - PCB Composite epoxy (CEM1) - 1.6mm thick - Mastering Components: * Ring Capacitor - 1.8μF * Resistor 470Ω * Arrestor 26A * Dimensions - 86mm x 86mm x 36mm * Surface mounted using the backbox provided or flush mounted in any standard single gang (BS3662 size UA1) wallbox * Knock-outs in the rear of the backbox give additional flexibility in cable/wiring entry and exit NTE5A is designed to terminate networks Two part unit. The NTE5a is fitted inside customer premises and provides a demarcation point between network and consumer wiring. Several BT manufacturing plants, sockets vary minimally as pictures shown above. Motif mainly on external front panel, or inside front network panel. Exclusively packaged by DTL, barcode: EAN: 5060192431452. Legal to be installed on PBX telephone systems, builders approved to network connection pass, and telephone network providers (front split half can also be installed legally by any individual consumer). IDC Tool is required to add extensions to front panel, search for: B003TQ9ZUI or 5060192431469
Price : £10.99
Samsung MobSam B2710 Makalu Blk GTB2710IKAXEU Phones Mobile Phones
Price : £90.77
What models of iPhone does it work with?
iDry has been designed to work with the 3G and 3GS models, and also works well with the iPhone 4 (since the iPhone 4 is slightly smaller than the 3G/3GS models, it will be a little loose in this case but still work fine - alternatively if you only use the iPhone 4, we would recommend purchasing the dedicated iDry for iPhone 4 case)
Price : £9.99
Designed by the French designer David Turpin the POP handset combines classic style with a contemporary edge and is finished with a luxurious soft-touch texture. The handset has been manufactured with a high quality speaker and microphone and can be used with all mobile phones when fitted with the correct adaptor (sold separately) and when fitted with a USB adaptor (sold separately) can be used for VOIP computer telephone calls (Skype Google Talk...). This product is fitted with a 3.5mm jack (compatible with the iPhone)------Features:----- Improved call comfort--- Allows access to phone functions when making calls--- Eliminates over 99% of absorbed phone radiation--- Turns your tablet computer into a telephone via Skype or VOIP applications--- Noise reduction system--- Supplied with a 3.5mm plug--- Works with all mobile devices adaptors available as accessories--- Works with all computers USB adaptor and splitter cable available as accessories--- Luxurious soft touch paint treatment--- High quality speaker and microphone------Compatible with all 3.5mm jack mobile phones. *Some phones may require an adapter* ----
Price : £12.65
